Easy cleaning

How to Clean Your Kuvings Juicer REVO 830

You've done your juicing! Now it's time to clean!

We all love the juices our juicers make, but many of us find it difficult or tedious to clean our juicers. Today we are here to help break down the steps to clean your Kuvings juicer with ease!

These are the tools you’ll want to wash your juicer.
The cleaning brush, the green rotational cleaning tool!

First things first, you’ll want to dismantle your juicer.
This part shouldn’t be too difficult

Next, you can start by washing the lid.
No sharp bits or edges here, so you don’t need to worry about cutting yourself.
Plain water will do the trick, but if you’ve juiced something with higher sugar content,
a little bit of dish soap won’t hurt.
Next you can start on the auger.
Again, you don’t need to worry about cutting your fingers on this.
Unlike a centrifugal juicer, our juicers have no sharp blades to slice your finger on.
A steady flow of running water from the sink is all it takes to wash away the pulp from the auger.

Now, you can move onto the juicing bowl.

The juicing bowl isn’t too difficult. You can use the back part of the cleaning brush to dig out the pulp that may be stuck in the pulp chute of the bowl. With the help of running water,
all the pulp will fall out easily.

Don’t forget to rinse underneath the silicons on your rotation wiper!
Hidden pulp can sometimes get trapped here and can build up over time.
A simple pull on the silicon will help you rinse underneath. 

Once you’re done with that, you’ve pretty much 90% done. The steps above shouldn’t have taken you longer than a minute and a half. 

Now, we move onto the part that I think most of you are concerned about.
The juicing screen! We have three methods that we use to wash the screen.
We’re going to teach you all three. 

Method 1. Kuvings Patented Green Rotation Brush

Kuvings is the only cold press juicer company in the world to include a patented cleaning tool specially designed for the juicing screen.
This cleaning tool comes included inside the box of ALL Kuvings juicers.
Insert your screen in the tool and twist the screen clockwise and anti clockwise repeatedly under running water.

There are small brushes that line up perfectly with the stainless steel part of the juicing screen and will brush away all that pesky pulp build up.

Method 2. Cleaning brush (Stick brush with tip)

This one is pretty straightforward.
Use the cleaning brush to brush away at the juicing screen’s holes.
The cleaning brush is especially helpful for those really stubborn bits of pulp that sometimes the rotational tool might not be able to get.

And you’re all done!

We know that none of us really enjoys washing our juicers…
But it’s important that we do it thoroughly to keep our juicer in a healthy condition for as long as possible.
If you treat your juicer right, your juicer will treat you right 🙂

We hope that this has given you some insight on how to wash your Kuvings juicer.
The more you do it, the easier it will become. Washing your Kuvings should take no longer than
3 minutes once you’ve gotten used to it.  

 

Happy Juicing!! 

Set your categories menu in Header builder -> Mobile -> Mobile menu element -> Show/Hide -> Choose menu
Таны сагс
Start typing to see products you are looking for.